
Clearing the fence line before building chain link
On rural land the line of a new fence is often buried in brambles, gorse or young trees. Clearing it is the first real job on site, and we do it as part of building the fence.
Why does the line need clearing at all?
In short: you cannot set out, dig footings or tension mesh accurately through dense scrub, and vegetation left in the mesh pulls it apart.
Setting out a fence needs a clear sight line from corner to corner and room to stretch a string. Digging footings needs space around each hole. Tensioning mesh needs a clear strip so the roll can be unrolled and pulled taut. None of that works in a bramble thicket.
There is also a longer-term reason. Shrubs and young trees left against the fence grow through the mesh; as their stems thicken, they stretch it and push posts out of line. A cleared strip at the start makes the fence easier to inspect and to maintain, as our chain link maintenance guide explains.

Is clearing a separate service?
In short: no – we clear the strip needed to build the fence, as part of a fence job, not whole plots or gardens.
The Spanish term is desbroce. We do it along the fence line only, as the first stage of building the fence. Clearing an entire plot, maintaining firebreaks or garden clearance are different jobs that we do not offer.
If an old fence is buried in the scrub, its removal is planned together with the clearing. See old fence removal and replacement for how that works.
What does clearing the line involve?
In short: cutting back scrub along a working strip, removing roots where footings go, and dealing with the cut material.
The work depends on what is growing. Grass and low weeds need little more than cutting. Brambles, gorse and thick scrub take longer, and their roots can be stubborn where post holes are to be dug. Young trees on the line need cutting and their stumps dealing with if they sit where a post must go.
Larger trees are different. We do not fell established trees as part of a fence job; if one stands on the boundary, the line usually goes around it, or you arrange its removal separately and with any permission it needs. Cut material has to go somewhere, and how it is handled is listed in the quote so nothing is left to assumption.
Are there fire rules to respect when clearing?
In short: yes – near forest land, Andalusian fire law restricts fire and risky activities, especially in high-danger periods, so check before work.
Much of inland Málaga is forest or scrubland, and Andalucía has its own fire-prevention law, the Ley 5/1999 de Prevención y Lucha contra los Incendios Forestales, developed by the regulation approved by Decreto 247/2001. The law sets periods of high, medium and low fire danger (article 6), prohibits lighting fires on forest land and in the surrounding zone of forest influence except in authorised cases (article 28), and makes activities that may affect fire risk subject to prior authorisation (article 29).
What this means for a particular plot and date – for example, whether cutting with power tools near woodland is restricted at a given time of year – depends on the location and the current rules, and should be checked with the ayuntamiento or the Junta de Andalucía before work starts (check for each job). Burning cuttings is the most obvious restriction, so plan for cut material to be removed.
What should stay on the line?
In short: boundary markers, protected trees and anything belonging to the neighbour – check before clearing.
Old boundary stones, posts or marks can be the only evidence of where the lindero runs, so they must be identified and kept until the boundary is agreed. Trees or hedges on the neighbour's side are theirs, even if they overhang. And some trees and habitats are protected; if you are unsure, ask before anything is cut.
Our guide to permits for rural chain link covers the related questions about boundaries, tracks and watercourses.
What happens after the line is clear?
In short: setting out, footings, posts and mesh – the clearing simply makes the build possible and accurate.
Once the strip is clear, we set out the line with stakes and string, confirm corners and changes of direction, and start the footings. From there the job proceeds as described on fencing land with chain link. Keeping the strip reasonably clear in future protects the fence and makes the yearly walk along it far easier.

Official sources
Articles and guides

Old fence removal and replacement with new chain link
When an old wire fence sags, leans or has fallen in sections, patching it rarely lasts. We take it out along the line and build a new chain link fence in its place, as one job.
View details →
Fencing land with chain link: plots, terraces and fincas
Fencing a plot or finca is mostly about the ground: slope, rock, scrub, access and long straight runs. We plan the line around those conditions and build a chain link fence that stays tight across the whole boundary.
View details →
Permits for rural chain link fences in Andalucía
Before a fence goes up on rural land in Málaga, it is worth knowing which rules apply and who to ask. This guide sets out the legal framework in plain English, with links to the official texts.
View details →Frequently asked questions
Do you clear the whole plot?
No. We clear the strip needed to build the fence, as part of the fence job.
How wide is the cleared strip?
Wide enough to set out, dig and tension the fence safely. It depends on the vegetation and the ground, and we agree it on the visit.
Do you remove trees?
We do not fell established trees. Small growth on the line is cleared; for large trees the line goes around them or you arrange removal separately.
Can you burn the cuttings?
Burning is heavily restricted near forest land under Andalusian fire law. Plan for cut material to be removed instead.
Is there a season when clearing is restricted?
Andalusian fire law defines periods of high, medium and low danger, with stricter rules in high-danger periods. Check the current restrictions for your location before work.
Do I need permission to clear scrub?
It depends on the land and the location. Near forest land or protected areas, ask the ayuntamiento or the Junta before work starts.
Will clearing damage my neighbour's side?
We work on the agreed line and your side of it. Anything on the neighbour's side is theirs, and we do not cut it without their agreement.
What if there is an old fence inside the brambles?
We remove it as part of the new fence job, together with the clearing.
Will the brambles grow back?
Yes, in time. Keeping a strip clear along the fence makes inspection easier and stops stems growing through the mesh.
Is clearing priced separately?
It appears as its own item in our quote, so you can see what it adds to the fence job.
Send photos of your boundary
Photos and an approximate length are enough to start. We measure, then send an itemised quote with no commitment – even if you are not in Spain.